From 059e0d95d0c28bc5060e87e146eaf7411f51bf90 Mon Sep 17 00:00:00 2001
From: George Halkiadakis <gchalkiadakis@sklavenitis.co.gr>
Date: Thu, 27 Apr 2023 03:47:30 +0300
Subject: skeleton commit; based on an anom project

---
 README.md | 191 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 191 insertions(+)
 create mode 100644 README.md

(limited to 'README.md')

diff --git a/README.md b/README.md
new file mode 100644
index 0000000..8e7a43c
--- /dev/null
+++ b/README.md
@@ -0,0 +1,191 @@
+# x-anom 
+(another MVC framework)
+
+
+
+## pre-Check
+
+Update ```~./container/config/composer-copy.json``` according to
+```~./composer.json``` or vice-versa. You actualy need just one of them;
+if pulling the project into a server (bare-metar/vps/shared etc) you only
+need the first; if pulling into container you need the second/
+
+
+On a Linux system you can also create a link from the one file to the other
+(then you need to use ralative paths on autoload.classmap section).
+
+When deploying on PRODUCTION make sure that all development routes are deleted
+and debuging messages are disabled.
+
+
+
+
+## Build
+
+    docker build -t x-anom .
+
+Force build without using cache:
+
+    docker build --no-cache -t x-anom .
+
+
+
+
+## Run
+
+    docker-compose up
+
+Force rebuild; then run:
+
+    docker-compose up --build
+
+
+
+
+## Remove builded containers
+
+    docker-compose down
+
+
+
+
+## While developing...
+
+By default autoloading is handled by Composer (this is highly recommended).
+While developing your application (or the framework itself) you will need to
+update the autoloading of your new classes. To do so, attach a shell, change
+to ```/var/www``` directory and run ```composer dump-autoload```
+
+    cd /var/www
+
+    composer dump-autoload
+
+If Composer is not an option and you use the framework's autoload implementation
+(enabling ```define('AUTOLOADER' , '../core/helpers/autoload.php');```),
+do not forger to update the (new) paths to your new classes in the ```CLASSPATHS```
+array . Both ```AUTOLOADER``` and ```CLASSPATHS``` definitions can be found
+into ```core/confing/anom_settings.php``` file.
+
+
+
+
+## XDebug
+
+anom comes with most configuration of XDebug ready; all you need is
+
+1. on Doockerfile: uncoomment the commands under XDebug section
+
+2. on docker-compose.yml: uncomment the services.web.extra_hosts section
+
+3. you may need configure your ide to listen onto XDebuger host port
+
+example: 
+for vscode you need to add a ~./.vscode/launch.json file like this:
+
+    {
+        "version": "0.2.0",
+        "configurations": [
+            {
+                "name": "Listen for Xdebug",
+                "type": "php",
+                "request": "launch",
+                "port": 9003,
+                "pathMappings": {
+                    "/var/www/public": "${workspaceRoot}/public"
+                }
+            }
+        ]
+    }
+
+
+
+
+## Customization
+
+The project includes several almost-ready-to-use technologies;
+You can enable / customize / disable / configure all these with a few edits.
+
+Each time you change the configuration of your environment, do not forget to set the
+related parameters on the main configuration file (```/core/config/anom_settings.php)```
+and/or define environmental variables or credentials to the ```/core/auth/.env``` file.
+
+NOTE: #1
+We assume that you use composer; if not, then whatever composer does you have to
+make it manually (copy dependency files and setup the autoloader's paths).
+
+NOTE: #2
+There is no need to use both Redis and Memcached, thus I have not test if these
+two caching technologies will work together using the proposed comfiguration.
+
+
+
+#### Redis
+
+To enable Redis...
+
+Onto docker-compose.yml:
+
+1. Uncomment the lines of 'redis' section; Your Redis-server host name will be the one that is specified in the container_name field (default: redis)
+
+2. Uncomment the networks subsections; web-server and Redis-server will communicate through a bridge network
+
+3. With composer:
+
+Include predis/redis into your project's requirements using ```/docker/config/composer-redis.json```
+as your composer.json file -or- install it via:
+
+    composer require predis/predis
+
+
+
+#### Memcached
+
+To host the Memcached service:
+
+1. Onto docker-compose.yml: uncomment the lines of 'memcached' section; Memcached-server host name will be the one that is specified in the container_name field (default: anomemcached)
+
+2. Onto Dockerfile: uncomment the lines under subsection 'Install Memcached'
+
+
+
+* TODO: Maria database
+
+
+* TODO: Adminer
+(https://stackoverflow.com/questions/33631085/how-to-use-adminer-with-composer-autoload-php)
+
+
+* TODO: phpMyAdmin
+
+
+* Apache
+
+
+* Opcache and JIT
+
+
+TODO:
+
+## Staging
+
+#### Build
+
+#### Deploy
+
+
+## Production
+
+### Build
+
+### Deploy
+
+! Run the above commands ONLY when you need to manually deploy the app to Cloud Run, otherwise everything is automated using Cloud Builds
+
+
+
+
+## Notes
+
+* '~./' refers to the root of the project
+
+* Furhter documentation about the framework can be found in ~./core/README.md
-- 
cgit v1.2.3